LCS3 Porcelain enamel steel markerboards and chalkboards
Perimeter trim is 1-1/2” wide.
Furnished with Z-bar clips for top and angle clips for bottom, 2’ on center.
Porcelain enamel steel markerboards and chalkboards
Claridge Cork, Fabricork, Designer Fabric, Hook-Fab, and Tan Nucork Tackboards
Satin anodize aluminum frame
Maximum length, 16’0”; maximum height - Type A and Type CO units - 4’0”
O.A. panel thickness approx. 1/2”
LCS3 Markerboards are GREENGUARD Certified
Finished size of units is ¼” larger in height and width than sizes listed. If exact overall size is required, specify when ordering.
Installation using 16A adhesive is recommended. Screws or wall anchors are not included.
Color anodize or powder coat finish aluminum frames
- Typical arrangements for markerboard, chalkboard, tackboard and combination board units shown below
Tackable Surface Options:
Powder Coat Finishes:
Claridge stands behind every product we make; we are confident that with the proper care and maintenance, our products are the most durable of any in the industry today. Please take the time to read and follow the guidelines to ensure that your visual display surfaces will reach their full potential for the life of the product.
NEED IMMEDIATE ASSISTANCE? Give us a call at 800.434.4610
Every effort will be made to ship in accordance with customer requested freight carriers. Claridge is not responsible for damage in shipment when the product is shipped on a third party or collect basis. In the event of visible freight damage, note the damage on the freight bill and notify the carrier at once for inspection. Note that carriers require reports of damage within 5 days. Failure to report visible damage or loss is the consignee's responsibility. Concealed damage or loss is the consignee's responsibility. Concealed damage identified after 5 days from receipt is the sole responsibility of the consignee.